Sale!

Compact Basics Course

$149.00 $119.00

Preliminary Topic List:
– Understanding the Design and Hardware that makes up the CompactLogix line
– How to Size a System, Choose Components, and Setup Communications
– How to Add, Edit, and Test Local I/O, and Distributed Ethernet I/O
– Understand, Create, and Edit Controller Tags, Program Tags, Tasks, Programs, and Routines
– How to create, test, run, and troubleshoot Ladder and Function Block Diagram Routines
(click here for details)

Add To Cart

903 in stock

Description

Overview


In Compact Basics you'll learn everything you need to know to setup, use, and program the Allen-Bradley CompactLogix Small Programmable Automation Controller.


Instructor: Shawn Tierney


This is the Pre-order Course Page for our CompactLogix Small PAC Basics course.

  • Course filming is scheduled to begin October 29th, and complete June 30th.
  • Over Thirty Lessons are planned for the initial release of this course (see below for details on planned lessons)


Preliminary list of planned lessons:

NOTE: Filming and publishing of the below lessons is scheduled from 10/29/18 through 01/31/19

  • Lesson 1.00: Course Intro
  • Lesson 1.01: Low cost options for following along
  • Section 2.00: Hardware Overview and Design
  • Lesson 2.01: First Gen – L20, L30
  • Lesson 2.02: Second Gen – L31, L32, L35, L23
  • Lesson 2.03: Third Gen – L4
  • Lesson 2.04: Forth Gen – 5370
  • Lesson 2.05: Fifth Gen – 5380
  • Lesson 2.10: CompactLogix Controller Anatomy
  • Lesson 2.20: Selection, Documentation
  • Exercise 2.20: Review your System's Documentation
  • Lesson 2.21: Selecting Components
  • Exercise 2.21: Configure your System in IAB
  • Section 3.00: Programming Software
  • Lesson 3.01: RSLogix 5000 and Studio 5000
  • Lesson 3.02: Software First Look, Sample Application Overview
  • Lesson 3.03: Controller Properties
  • Lesson 3.04: Tasks, Programs, Routines, Tags
  • Exercise 3.04: Create a new project for your hardware
  • Section 4.00: Communications Section
  • Lesson 4.01: Addressing Ethernet Devices
  • Lesson 4.02: Setting up Comm Drivers
  • Lesson 4.03: Flashing Firmware
  • Exercise 4.03: Setup your Communications and Hardware
  • Section 5.00: I/O
  • Lesson 5.01: Built-in and Local 1769 I/O Configuration
  • Lesson 5.02: Remote Ethernet 1769 I/O
  • Lesson 5.03: 1769 Analog I/O Configuration
  • Lesson 5.11: Local 5069 I/O Configuration
  • Lesson 5.12: Remote Ethernet 5069 I/O
  • Lesson 5.13: 5069 Analog I/O Configuration
  • Lesson 5.21: Remote Ethernet Point I/O
  • Lesson 5.31: Remote Ethernet Flex I/O
  • Exercise 5.31: Configure your I/O
  • Section 6.00: Programming Section
  • Lesson 6.01: Ladder Logic in CompactLogix – How it works/differs from A-B PLCs
  • Lesson 6.02: Motor Control Ladder Routine
  • Exercise 6.02: Create and test your own Motor Control Program
  • Lesson 6.03: Part Sensing Ladder Routine
  • Exercise 6.03: Create and test your own Part Sensing Routine
  • Lesson 7.11: Function Block Diagram Routines – How they work
  • Lesson 7.12: Machine Runtime FBD
  • Exercise 7.12: Create and test your own Machine Runtime Routine
  • Lesson 7.13: Scaling Analog FBD
  • Exercise 7.12: Create and test your own Scaling Routine
  • Lesson 7.21: User Defined Data Types – what they are
  • Lesson 7.22: Creating and Using UDDTs
  • Exercise 7.22: Create and test your own UDDT
  • Section 8.00: Possible Future Advanced Programming Topics
  • Section 9.00: Possible Future HMI and SCADA Topics
  • Section 10.00: Final Lesson, Accessing and Printing Your Certificate, Credits

Click here for more course details.


Details

Compact Basics Course Pre-order Details:

Our CompactLogix Small PAC Basics Course (Compact Basics) is designed for those students who are already familiar with PLCs, and would like to learn how to setup, program, and troubleshoot the CompactLogix family of Small Programmable Automation Controllers (PACs) using RSLogix 5000 and Studio 5000

NOTE: This is a PRE-ORDER of a “yet to be filmed” video course. When you purchase this PRE-ORDER, you pay a greatly reduced price now (over 20% off) for early AND lifetime access to the final course prior to the first course lessons being published. The first lessons are expected to be published in the first week in November, 2018, at which time the price will increase and Early Access will begin. The course is scheduled to be completed by June 30, 2019.

NOTE: If you've never used or programmed a Programmable Controller then you may want to take our “PLC Basics” course before you take this CompactLogix Programmable Automation Controller course.

NOTE: This course is similar to our ControlLogix “PAC Basics” course, as both the ControlLogix and CompactLogix program using the same software, RSLogix 5000 aka Studio 5000 Logix Designer. The major difference is you will learn how to configure, setup, and use CompactLogix hardware in place of ControlLogix hardware.


Preliminary list of planned topics:

  • Understanding the design and different models of CompactLogix
  • The difference between RSLogix 5000 and Studio 5000
  • How to size a system and choose components
  • How to configure Controllers, I/O, and Communications
  • How to setup Ethernet, Serial DF1, and USB drivers in RSLinx Classic
  • How to setup, configure, and edit RSLogix/Studio 5000 projects
  • How to add, edit, and test Local I/O, and Distributed Ethernet I/O
  • Understanding Controller and Program tags
  • How to create and edit Tags and Aliases
  • How to setup, configure and edit Tasks, Programs, and Routines
  • Understanding how Ladder Logic differs in CompactLogix when compared with other A-B PLCs
  • How to create, test, run, and troubleshoot Ladder Diagram Routines.
  • Understanding Function Block Diagram Routines, and how they Execute
  • How to create, test, run, and troubleshoot Function Block Diagram Routines
  • How to create and use User Defined Data Types

Preliminary list of planned lessons:

  • Lesson 1.00: Course Intro
  • Lesson 1.01: Low cost options for following along
  • Section 2.00: Hardware Overview and Design
  • Lesson 2.01: First Gen – L20, L30
  • Lesson 2.02: Second Gen – L31, L32, L35, L23
  • Lesson 2.03: Third Gen – L4
  • Lesson 2.04: Forth Gen – 5370
  • Lesson 2.05: Fifth Gen – 5380
  • Lesson 2.10: CompactLogix Controller Anatomy
  • Lesson 2.20: Selection, Documentation
  • Exercise 2.20: Review your System's Documentation
  • Lesson 2.21: Selecting Components
  • Exercise 2.21: Configure your System in IAB
  • Section 3.00: Programming Software
  • Lesson 3.01: RSLogix 5000 and Studio 5000
  • Lesson 3.02: Software First Look, Sample Application Overview
  • Lesson 3.03: Controller Properties
  • Lesson 3.04: Tasks, Programs, Routines, Tags
  • Exercise 3.04: Create a new project for your hardware
  • Section 4.00: Communications Section
  • Lesson 4.01: Addressing Ethernet Devices
  • Lesson 4.02: Setting up Comm Drivers
  • Lesson 4.03: Flashing Firmware
  • Exercise 4.03: Setup your Communications and Hardware
  • Section 5.00: I/O
  • Lesson 5.01: Built-in and Local 1769 I/O Configuration
  • Lesson 5.02: Remote Ethernet 1769 I/O
  • Lesson 5.03: 1769 Analog I/O Configuration
  • Lesson 5.11: Local 5069 I/O Configuration
  • Lesson 5.12: Remote Ethernet 5069 I/O
  • Lesson 5.13: 5069 Analog I/O Configuration
  • Lesson 5.21: Remote Ethernet Point I/O
  • Lesson 5.31: Remote Ethernet Flex I/O
  • Exercise 5.31: Configure your I/O
  • Section 6.00: Programming Section
  • Lesson 6.01: Ladder Logic in CompactLogix – How it works/differs from A-B PLCs
  • Lesson 6.02: Motor Control Ladder Routine
  • Exercise 6.02: Create and test your own Motor Control Program
  • Lesson 6.03: Part Sensing Ladder Routine
  • Exercise 6.03: Create and test your own Part Sensing Routine
  • Lesson 7.11: Function Block Diagram Routines – How they work
  • Lesson 7.12: Machine Runtime FBD
  • Exercise 7.12: Create and test your own Machine Runtime Routine
  • Lesson 7.13: Scaling Analog FBD
  • Exercise 7.12: Create and test your own Scaling Routine
  • Lesson 7.21: User Defined Data Types – what they are
  • Lesson 7.22: Creating and Using UDDTs
  • Exercise 7.22: Create and test your own UDDT
  • Section 8.00: Possible Future Advanced Programming Topics
  • Section 9.00: Possible Future HMI and SCADA Topics
  • Section 10.00: Final Lesson, Accessing and Printing Your Certificate, Credits

NOTE: Are you looking for a course on the ControlLogix? If you are, check out my “PAC Basics.”


Who should take this course:

Anyone who already has some PLC experience and would like to learn how to setup, use, and program the Allen-Bradley line of CompactLogix Small Programmable Automation Controllers (PACs.)


Requirements to complete optional exercises or follow along:

Students who wish to complete optional exercises, or follow along with the instructor as he programs, will need the following:

1) A working copy of RSLogix 5000 or Studio 5000, and a compatible Windows PC to run it on:

  • Rockwell currently does not offer a free download of the RSLogix 5000 or Studio 5000 programming software
  • The Instructor does cover how to request a free 30 day evaluation copy of the above software from Rockwell
  • To find out if your Windows PC is compatible with your Rockwell Software, visit Rockwell's website here
  • 2) A CompactLogix controller (with inputs and outputs) that is compatible with the students Windows computer AND their version of RSLogix 5000 or Studio 5000:

    • Before purchasing a Controller, Software, or PC, students should check that they are compatible with each other
    • Controller, Programming Software, and Communications options and compatibility are covered in the course
    • Students may also wish to use Input (push buttons, switches, etc) and Output (pilot lights, relays, etc) devices with their controller
    • Note: The course includes how to find I/O wiring diagrams, but does not include lessons on basic electricity or wiring

Sample Lesson

Coming with Early Access.


Images

Coming upon Course Completion.


Reviews

Coming after first reviews submitted.


Questions

Please feel free to ask your questions using one of the links below:

Lessons

Lesson 1.00: Course Intro & Tips (3 mins)

Lesson 1.01: Hardware, Software Used (6 mins)

Lesson 1.02: I/O Devices Used (6 mins)

Lesson 2.01: Hardware Documentation

Lesson 2.02: CompactLogix L20, L30

Lesson 2.03: CompactLogix L3x

Lesson 2.04: CompactLogix L23

Lesson 2.05: CompactLogix L4x

Exercise 2.05: Review Gen 1 - 3 (10 Mins)

Lesson 2.06: CompactLogix 5370

Lesson 2.07: CompactLogix L3

Lesson 2.08: CompactLogix L2

Lesson 2.09: CompactLogix L1

Exercise 2.09: Review 5370 (10 Mins)

Lesson 2.10: Compact I/O 1769

Exercise 2.10: Review 1769 I/O (10 Mins)

Lesson 2.11: CompactLogix 5380

Lesson 2.12: Compact I/O 5069

Exercise 2.12: Review 5069 (10 Mins)

Lesson 2.13: Controller Reset

Lesson 2.21: Controller Architecture

Lesson 2.22: Controller Operating System

Exercise 2.22: Review Architecture and OS (10 mins)

Lesson 2.23: Product Selection 1

Lesson 2.24: Product Selection 2

Exercise 2.24: Download and Use IAB (10 Mins)

Lesson 3.01: Origin of RSLogix (4 mins)

Lesson 3.02: RSLogix, Studio 5000

Lesson 3.03: RSLogix/Studio 5000 First Look

Exercise 3.03: (10 mins)

Lesson 4.01: BootP-DHCP Tool

Lesson 4.02: RSLinx Driver Setup

Lesson 4.03: Set IP Through RSLinx

Lesson 4.11: Using ControlFlash

Lesson 4.12: Firmware Files (5m)

Exercise 4.12: (10 mins)

Lesson 5.00: Intro to I/O

Lesson 5.01: L30, 1769 I/O

Lesson 5.02: Forcing I/O

Lesson 5.04: L23, 1769 I/O (8 mins)

Lesson 5.06: L3x, 1769 I/O

Lesson 5.08: L1x, 1734 I/O

Lesson 5.09: Local 5069 I/O (10 mins)

Lesson 5.10: Multicast & Unicast

Lesson 5.11: Ethernet Point I/O (13 mins)

Lesson 5.12: Ethernet Flex I/O (10 mins)

Exercise 5.12: Add & Test I/O (10 mins)

Lesson 6.00: Introduction

Lesson 6.01: Program 1

Exercise 6.01: Reverse (10 mins)

Lesson 6.02: Program 2

Exercise 6.02: Combine (10 mins)

Lesson 6.03: Program 3

Lesson 6.04: Program 4

Lesson 6.05: Program 5A

Lesson 6.05: Program 5B

Lesson 6.05: Program 5C

Lesson 6.06: Program 6

Lesson 6.07: Trending

Lesson 6.08: Program 7A

Lesson 6.08: Program 7B

Appendix A: All Downloads (CB)

Appendix B: Experience Kit (17 mins)

Appendix C: Find Your Rep (2 mins)