Friends – Activity – Riddhi – The Automation School

Shawn Tierney commented on lesson Lesson 4.82: PanelView 800 Part 2 5 years, 3 months ago

Good morning Lee,

You should find right clicking on the “Screens” item in the tree provides you with an option “Add Screen: to add additional Screens.

And in the previous lesson, “Lesson 4.81: PanelView 800 Part 1,” at around the 4:13 mark you'll see the Serial CIP selection which you'll use for serial connections to the Micro830 via DF1…[Read more]
Shawn Tierney commented on lesson Lesson 31: Backing Up Your Project 5 years, 3 months ago

Great question CB!

You can use the transfer utility shown in lesson 29 (starting at 3:15) to upload the .MER file as well.

That said, not all .MER files can be restored into an “editable” project using the Application Manager (see the option which appears in this lesson at the 1:00 mark.)

I cover why in an article here:…[Read more]
Shawn Tierney replied to the topic Micrologix 1500 in the forum Pre-sales Questions 5 years, 3 months ago

Good morning Robert,

I would recommend my PLC Basics Extended Edition course as everything in the course that I do with the MicroLogix 1000 and 1100 can be done with the 1500, except the 1500 doesn't support the free programming software from Rockwell:

PLC Basics Extended Edition

I also plan to add MicroLogix 1200,…[Read more]
Shawn Tierney replied to the topic PanelView Plus – Parameter file / list as course topic in the forum Pre-sales Questions 5 years, 3 months ago

Good morning Stephen,

Thanks for your question.

Currently I don't cover parameter files or lists in PVP Basics + as I do in ViewSE Basics, but I plan on adding that and other new lessons to the course this fall, and those new lessons will be free to existing students.

For a complete list of current topics, see the course home page below, and…[Read more]
Shawn Tierney commented on lesson Lesson 10: Project System Settings 5 years, 3 months ago

Awesome – thanks for the heads up!

Sincerely,

Shawn Tierney,
Instructor at The Automation School
Shawn Tierney commented on lesson Lesson 10: Project System Settings 5 years, 4 months ago

Good morning Maitrey,

Thanks for the info!

I would recommend setting the size to 100%, and then rebooting, and then creating a new application.

If that doesn't work, I'm out of ideas of why Rockwell's software isn't displaying correctly on your PC, and would recommend contacting (1) Rockwell to debug why it is their software isn't…[Read more]
Shawn Tierney commented on lesson Lesson 10: Project System Settings 5 years, 4 months ago

Good morning Maitrey,

Thanks for the info – can you tell me what setting you have in Windows under Display Settings under Scale and Layout – Change the size of text, apps, and other items? Also, can you check to see if your video card has a driver update?

Sincerely,

Shawn Tierney,
Instructor at The Automation School
Shawn Tierney commented on lesson Lesson 10: Project System Settings 5 years, 4 months ago

Good afternoon Maitrey,

Thank you for sharing your image.

From what you sent it appears it's FT View Studio system menus like “Project Settings” which are not displaying correctly?

This to me seems like a bug, and something I would recommend contacting Rockwell about.

I've seen similar issues when I have set Microsoft Windows up to…[Read more]
Shawn Tierney completed the lesson Lesson 1.00: Course Intro & Tips (3 mins) 5 years, 4 months ago

Lesson

Lesson 1.00: Course Intro, Tips by Shawn Tierneyin Compact Basics, Level 1 & 2
Shawn Tierney completed the lesson Lesson 8.07: Security, Part 1 5 years, 4 months ago

Lesson

Lesson 8.07: Security, Part 1 by Shawn Tierneyin ViewSE Basics
Shawn Tierney commented on lesson Lesson 22: Communications Setup 5 years, 4 months ago

Good morning Maitrey,

Thank you for your question.

Back in Lesson 7 I cover the two place to find that information.

At about 1 minute and 46 seconds I show how to view the .MER's settings.

And at around 14 minutes I show how you can edit the currently loaded configuration, however if you have your PVPlus set to load communications…[Read more]
Shawn Tierney replied to the topic Nano Basics Questions in the forum Pre-sales Questions 5 years, 4 months ago

Thanks for the feedback Meden
Shawn Tierney replied to the topic Converting legacy programs to Studio in the forum Pre-sales Questions 5 years, 4 months ago

Good morning Charles,

Thanks for your feedback.

Since you've already viewed Lesson 51 (importing PLC programs,) what additional information do you think is needed?

Between the SLC-500, MicroLogix, and ControlLogix there are dozens of Analog Cards, and they are all a little different, which makes creating a universal lesson on that subject…[Read more]
Shawn Tierney replied to the topic Nano Basics Questions in the forum Pre-sales Questions 5 years, 4 months ago

Good morning Meden,

In “Nano Basics Extended Edition” I show how to communicate to the PowerFlex 4m via Modbus (lesson 4.6), and PowerFlex 525 via Ethernet (lesson 4.7), both by using Rockwell's free sample code.

The UDFB (User Defined Function Blocks) I use in these lessons “reads” the Status Bits and Actual Speed, and “writes” to the Control…[Read more]
Shawn Tierney replied to the topic Student Discount in the forum Pre-sales Questions 5 years, 5 months ago

Good morning Maitrey,

Please contact me directly for a personalize student discount coupon by using this page:

Ask a Question

Thanks,

Shawn Tierney,
Instructor, The Automation School
Shawn Tierney replied to the topic Panel View Standard AMA in the forum Pre-sales Questions 5 years, 5 months ago

Thanks for the follow-up Charles!

I've seen that before – I usually say you need to give the HMI a few seconds to see it, especially on slower networks.

Shawn
Shawn Tierney replied to the topic Converting legacy programs to Studio in the forum Pre-sales Questions 5 years, 5 months ago

Good morning Charles,

Great to hear from you. There are so many legacy platforms – which ones are you most interested in?

Below I'll list some of the legacy platforms available – some are much harder to convert than others:

Convert to View Studio:

– PanelView (original, aka PanelView 1200) uses PanelBuilder
– PanelView E (aka Enhanced, 1000E,…[Read more]
Shawn Tierney replied to the topic HMI Programming in the forum Pre-sales Questions 5 years, 7 months ago

Good morning hfserran,

As your question isn't a course pre-sales question, please feel free to post it on my free forum, TheAutomationForums.com.

Sincerely,

Shawn Tierney
Instructor at The Automation School
Shawn Tierney replied to the topic Converts logic to Studio 5000 in the forum Pre-sales Questions 5 years, 7 months ago

Good morning WD,

Thanks for posting your question.

I ask all students to post their questions on the lesson the question is on. As you're not enrolled in any of our courses, please make use of our free forum at TheAutomationForums.com.

As far as PID, none of our courses cover the PID instruction as of yet as I haven't found a good process or…[Read more]
Shawn Tierney replied to the topic PlantPax in the forum Pre-sales Questions 5 years, 8 months ago

Good morning Andre,

Please see our training catalog for details, options, and pricing on all our courses:

Click to access The-Automation-School-Spring-2019-Course-Catalog-v01.3.pdf

Sincerely,

Shawn Tierney,
Instructor at The Automation School
Load More

Riddhi

@riddhipadariya

@riddhipadariya